Search results for: Pateke well

82192 results

A list of search results

  • 5 February 2014

    AWE Limited has informed that at 03:15 hours today (New Zealand Daylight Time) the handover of the Kan Tan IV semi-submersible drill rig to AWE, as Operator of the PMP 38158 joint venture, was completed and that the rig is moving into position in preparation for drilling the Pateke-4H development well. The Pateke-4H development well is […]

  • 8 April 2014
    Business & Finance, Project & Tenders

    AWE Limited reports that as at 06:00 hours (6.00am NZST) today, the Pateke-4H development well, offshore New Zealand, including the sidetrack section, was at a measured depth of 4,083m with the 9 5/8 inch casing successfully installed and cemented to a depth of 3,669m. Preparations are under way for the drilling of the next interval […]

  • 18 February 2014

    AWE Limited reports that as at 06:00 hours (6.00am NZDT) today, the Pateke-4H development well, located offshore New Zealand,  was at a measured depth of 1,507 metres and 13 3/8 inch casing had been run to the planned depth of 1,504 metres. Preparations are being made to cement the casing and prepare for the installation […]

  • 1 April 2014
    Project & Tenders

    AWE Limited reports that as at 06:00 hours (6.00am NZDT) today, the Pateke-4H development well sidetrack has been drilled to a measured depth of 4,083m, landing at an angle of 90 degrees and having penetrated the hydrocarbon bearing F10 reservoir sand. Installation of the 9 5/8 inch casing is currently in progress, following which the well will be […]

  • 18 March 2014
    Project & Tenders

    AWE Limited reports that as at 06:00 hours (6.00am NZDT) today, the Pateke-4H development well, offshore new Zealand was preparing to sidetrack a short section of lower wellbore. The mechanical drill string difficulties experienced in the original hole were unable to be fully resolved and the lower part of the hole has been abandoned. It […]

  • 18 February 2014
    Business & Finance, Operations & Maintenance

    AWE Limited reports that as at 06:00 hours (6.00am NZDT) today, the Pateke-4H development well was at a measured depth of 1,507 metres and 13 3/8 inch casing had been run to the planned depth of 1,504 metres. Preparations are being made to cement the casing and prepare for the installation of the subsea wellhead. […]

  • 25 February 2014
    Project & Tenders

    AWE Limited reports that as at 06:00 hours (6.00am NZDT) today, the Pateke-4H development well, offshore New Zealand, was at a measured depth of 1,507 metres and 13 3/8 inch casing had been run and cemented with the casing shoe set at 1,504 metres. The subsea tree has been successfully installed, pressure tested and function tested. The Blow […]

  • 25 October 2010
    Project & Tenders

    AWE Limited is pleased to report that the Pateke-3H well has successfully recommenced production over the weekend, after initial efforts to restart the well were delayed due to technical issues following the workover of the well. The Pateke-3H well is currently flowing at over 4,000 bopd with some “flush” production being achieved from the well […]

  • 11 October 2010
    Business & Finance

    AWE Limited, on behalf of the Tui joint venture parties, announced the resumption of oil production from the Pateke-3H well, located in the offshore Taranaki Basin. The Pateke-3H well suffered from problems with the artificial lift system, and the well has been shut-in since late June, 2010. A workover of the well has been successfully […]

  • 20 October 2010
    Business & Finance, Equipment, Project & Tenders

    AWE Limited reports that the recommencement of production from the Pateke-3H well has been delayed due to further technical issues. A clean up flow of the well was undertaken prior to the Kan Tan IV rig being released from site on October 15, 2010, with the well repair activities having been successfully completed. The re-establishment […]

  • 13 May 2014
    Business & Finance, Operations & Maintenance

    AWE Limited reports that as of 06:00 hours (6.00am NZDT) today the Pateke-4H development well was running the production tubing and associated equipment. The well will then be suspended for later production. The installation of a subsea flow-line and ancillary control equipment to the Tui Field gathering system to enable the Pateke-4H well to be […]

  • 13 May 2014

    AWE Limited reports that as 6.00am New Zealand Daylight Time today the Pateke-4H development well was running the production tubing and associated equipment. The well, located in the Taranaki basin, offshore New Zealand, will then be suspended for later production. The installation of a sub-sea flow-line and ancillary control equipment to the Tui Field gathering system […]

  • 29 April 2014
    Business & Finance, Equipment, Operations & Maintenance, Research & Development

    AWE Limited reported that the Pateke-4H development well was at a measured depth of 4,700m and drilling ahead on a horizontal trajectory through the Kapuni F10 sandstone reservoir with an 8 1/2 inch drilling assembly. The reservoir was intersected at 4,023m and operations have drilled 677m horizontally through the F10 reservoir section with approximately 681m […]

  • 4 March 2014
    Business & Finance, Project & Tenders

    AWE Limited reports that as at 06:00 hours today, the Pateke-4H development well, offshore New Zealand, was at a measured depth of 3,689 metres and drilling ahead. The Blow Out Preventer (BOP) was successfully installed and tested and the 13 3/8 inch casing shoe was drilled out. A 12 ¼ inch section was drilled vertically to 3,000 […]

  • 7 April 2015
    Business & Finance, Equipment, Operations & Maintenance

    AWE, as operator of PMP 38158, has informed that the subsea tie-back and installation project to connect the Pateke-4H development well to the Tui area oil fields gathering system has been successfully completed and that oil production has begun. The Pateke-4H well has been brought onto production and flow testing is under way to determine the optimal well settings. […]

  • 22 April 2014
    Business & Finance, Project & Tenders

    AWE Limited reports that as at 6:00 am NZDT today the Pateke-4H development well was at a measured depth of 3,863m and drilling ahead on the planned trajectory with an 8 1/2 inch drilling assembly after successfully side-tracking from the 9 5/8 inch casing at 3,587m. The second sidetrack (ST-2) will be drilled to a […]

  • 6 March 2014
    Business & Finance, Project & Tenders

    AWE Limited reports that as at 06:00 hours (6.00am NZDT) today, the Pateke-4H development well, offshore New Zealand, had been drilled to a total measured depth of 4,110 metres and an inclination of 89 degrees. The primary objective, the Kapuni F sands, has been penetrated on prognosis by the 12 ¼” drilling assembly. Oil shows […]

  • 25 February 2014
    Business & Finance, Operations & Maintenance

    AWE Limited reports that as at 06:00 hours (6.00am NZDT) today, the Pateke-4H development well was at a measured depth of 1,507 metres and 13 3/8 inch casing had been run and cemented with the casing shoe set at 1,504 metres. The subsea tree has been successfully installed, pressure tested and function tested. The Blow […]

  • 7 April 2015
    Project & Tenders

    AWE Limited has said that it has completed the subsea tie-back and installation project to connect the Pateke-4H development well to the Tui area oil fields gathering system in New Zealand. Oil production has begun. The Pateke-4H well has been brought onto production and flow testing is under way to determine the optimal well settings. The well recorded an […]

  • 6 May 2014
    Business & Finance, Operations & Maintenance

    AWE Limited has reported that the Pateke-4H development well was at a total measured depth of 4,772m, including a 749m horizontal section through the reservoir. The total depth was revised from the original 5,381m target due to the high quality of the reservoir encountered and to ensure a stable well bore was achieved for effective […]

  • 25 March 2014
    Business & Finance, Operations & Maintenance

    AWE Limited reports that as at 06:00 hours (6.00am NZDT), the Pateke-4H development well sidetrack was at a measured depth of 3,845m, directionally drilling ahead with a 12 ¼ inch drilling assembly. It is planned to drill this section of the well to a measured depth of approximately 4,110m, landing at an angle of approximately […]

  • 29 April 2014
    Business & Finance, Project & Tenders

    AWE Limited reports that as at 06:00 hours (6.00am NZDT) today the Pateke-4H development well, offshore New Zealand, was at a measured depth of 4,700m and drilling ahead on a horizontal trajectory through the Kapuni F10 sandstone reservoir with an 8 1/2 inch drilling assembly. The reservoir was intersected at 4,023m and operations have drilled […]