Search results for: fabrication

6406 results

A list of search results

  • 25 April 2014
    Business & Finance, Equipment

    Gulf Island Fabrication, Inc. reported net income of $3.5 million ($0.24 earnings per share) on revenue of $134.7 million for its first quarter ended March 31, 2014, compared to net income of $2.8 million ($0.19 earnings per share) on revenue of $150.4 million for the first quarter ended March 31, 2013. The company had a […]

  • 3 October 2012

    Dutch engineering and fabrication company Heerema Fabrication Group (HFG) was already a well known player in the oil & gas industry, when around five years ago, the offshore wind industry was just really setting off. Then HFG was asked whether they could build some small platforms for this new industry. With the company’s vast experience […]

  • 5 October 2012

    A joint venture between Strukton Systems and Hollandia is building transformer stations for the offshore wind industry at the Hollandia fabrication yard on the banks of the rivers IJssel and Lek where they meet in Krimpen aan den IJssel, just outside of Rotterdam. Strukton Systems is a specialist in the design, construction and maintenance of […]

  • 2 December 2013
    Business & Finance

    Heerema Fabrication Group (HFG), a leading engineering and fabrication contractor, announced the opening of their new fabrication facility in the south of Poland, Opole. The official opening of the facility is performed by Mr Pieter Heerema. The growing demand of qualified prefabrication of small offshore steel structures and substructures for HFG’s fabrication yards and the […]

  • 5 March 2013
    Business & Finance, Project & Tenders

    Gulf Island Fabrication, Inc., announced that, through its subsidiary Gulf Marine Fabricators, it has received a Letter of Intent in anticipation of a contract for the fabrication of a 1200’ jacket from Walter Oil & Gas Corporation for its Coelacanth Project located at Ewing Bank 834 in the Gulf of Mexico. Revenue backlog and man-hours […]

  • 5 October 2012

    A joint venture between Strukton Systems and Hollandia is building transformer stations for the offshore wind industry at the Hollandia fabrication yard on the banks of the rivers IJssel and Lek where they meet in Krimpen aan den IJssel, just outside of Rotterdam. Strukton Systems is a specialist in the design, construction and maintenance of […]

  • 15 November 2019
    Business & Finance

    U.S. offshore facilities fabrication company Gulf Island Fabrication has named a new president and chief executive officer (CEO).

  • 16 June 2015
    Business & Finance

    Gulf Island Fabrication, Inc., a fabricator of offshore drilling and production platforms, has received a letter of Intent (LoI) from a U.S. customer. The company received the LoI through its subsidiary, Gulf Island L.L.C.. The LoI is for the fabrication of six jacket/piles and deck sections, the company said without revealing the customer or any financial details. Gulf […]

  • 9 October 2013
    Business & Finance

    Huntington Ingalls Industries’ Ingalls Shipbuilding division has started fabrication on the U.S. Coast Guard’s sixth National Security Cutter (NSC), Munro (WMSL 755). “Our shipbuilders have a great jump start on the construction of this ship as we have already cut and processed more than 400 tons of steel for NSC 6,” said Jim French, Ingalls’ […]

  • 6 November 2015
    Equipment

    Heerema Fabrication Group (HFG), an engineering and fabrication contractor for offshore structures to the oil and gas industry, has opened the Heerema Innovation Center. The new center is located near the Group’s headquarters, in Zwijndrecht, the Netherlands. According to Heerema, the first project for the Heerema Innovation Center is the welding robot, which has been developed […]

  • 11 April 2017
    Storage

    The substation topside built by Heerema Fabrication Group for the 336MW Galloper offshore wind farm has been loaded onto a barge at the fabricator’s Hartlepool yard.

  • 25 January 2019
    Business & Finance, Equipment

    Hawaiki and PacketFabric have signed a strategic partnership to provide transpacific capacity on the Hawaiki submarine cable system and extend the reach of PacketFabric’s Software-defined Networking (SDN) platform into APAC. Launched in July 2018, the Hawaiki transpacific cable is a 15,000 km fibre optic deep-sea, carrier-neutral cable with a design capacity of 67 Tbps. With […]

  • 31 December 2018
    Business & Finance

    Italian offshore industry player Rosetti Marino will not be proceeding with the previously proposed acquisition of the Dutch Heerema Fabrication Group’s Zwijndrecht yard in the Netherlands.

  • 3 July 2015
    Business & Finance, Exploration & Production

    Gulf Island Fabrication, Inc., a Houston-based fabricator of offshore drilling and production platforms, has signed a contract with an oil and gas company with operations in Trinidad for the fabrication of a jacket and piles for one of its offshore locations. According to the company’s press release, the contract was signed through its subsidiary Gulf Island […]

  • 11 October 2011
    Business & Finance

      Austal’s US shipyard has celebrated the official start of fabrication for the third Joint High Speed Vessel (JHSV 3), one of seven Austal-designed 103 metre US Navy Joint High Speed Vessels (JHSV) under contract with the US Department of Defense​. “The race is on,” said Austal USA President and Chief Operating Officer, Joe Rella. […]

  • 28 July 2017

    Gulf Island Fabrication, a Houston-based fabricator of specialized offshore structures, has ended up in the red for the 2Q 2017 due to reduced revenue for the quarter. Gulf Island said in its second quarter financial report that it went from black to red in 2Q with a loss of $10.9 million. In the second quarter […]

  • 24 October 2019
    Equipment, Project & Tenders

    The Peregrino C jacket, built by Heerema Fabrication Group for Equinor, has left a fabrication yard in the Netherlands and sailed away to Brazil.

  • 5 January 2016
    Business & Finance, Equipment

    Gulf Island Fabrication, a Houston-based fabricator of specialized offshore structures, has completed the purchase of substantially all of Leevac’s machinery and equipment. The purchase agreement between Leevac Shipyards, LLC and its related affiliates, and a Gulf Island subsidiary was made on December 23, 2015, and included Leevac’s leasehold interests at its marine fabrication facilities in Jennings, […]

  • 21 November 2018
    Business & Finance

    Heerema Fabrication Group (HFG) is planning to divest a part of its activities dedicated to the design and fabrication of steel constructions for the offshore market following a strategic review.

  • 14 June 2016
    Project & Tenders

    Shell and Technip-MMHE Joint Venture (TMJV) have concluded the onshore fabrication and commissioning of the Malikai deep-water platform. According to Shell, this milestone marks the sail away of Malaysia’s first Tension Leg Platform (TLP) to the site 100km offshore Sabah. The TLP will be making a 1,400km journey from Pasir Gudang to arrive at the Malikai […]

  • 13 June 2014

    The fabrication of the Gode Wind foundations, which Bladt Industries are fabricating for Dong Energy, is well on the way. This week the TP mockup was upended at Bladt’s upending site. After this, the Bladt team installed the concrete platform on the TP mockup, which is the first of 97 TP’s for the Gode Wind project. […]