The first external platform produced by Energomontaż-Północ Gdynia (EPG) for the 731.5MW Borssele 3 & 4 wind farm is ready for final outfitting, the Polish manufacturer said. In total, EPG will manufacture and deliver 76 external platforms for the project in the Dutch North Sea. The Borssele 3 & 4 w
Baltic Power, part of Orlen Group, has deployed a floating LiDAR at its offshore wind farm license area in the Polish Baltic Sea. The LiDAR will study environmental impacts and wind conditions which are expected to help assess the potential for the development of Baltic Power’s project with a capaci
Baltic Power, part of Orlen Group, has deployed a floating LiDAR at its offshore wind farm license area in the Polish Baltic Sea. The LiDAR will study environmental impacts and wind conditions which are expected to help assess the potential for the development of Baltic Power’s project with a capaci
Poland’s Mostostal Pomorze has loaded out the substation topside built for the Northwester 2 offshore wind farm in Gdansk. The load-out operations were performed on 13 and 14 of April. The topside is currently travelling to Aalborg in Denmark where Bladt Industries will continue working on it. In Ju
MFW Bałtyk III Sp. z o.o., a joint venture between Equinor and Polenergia S.A., has secured an environmental decision for the offshore grid infrastructure connecting two offshore wind farms with a total capacity of 1440MW to the Polish national grid system. The decision was issued by the Regional Di
MFW Bałtyk III Sp. z o.o., a joint venture between Equinor and Polenergia S.A., has secured an environmental decision for the offshore grid infrastructure connecting two offshore wind farms with a total capacity of 1440MW to the Polish national grid system. The decision was issued by the Regional Di
TELE-FONIKA Kable (TFKable) has conducted the first Factory Acceptance Test (FAT) of a 220kV onshore high-voltage cable for the UK’s Moray East offshore wind farm at its Bydgoszcz plant in Poland. The cable supplier informed via social media that it had successfully FAT-tested 1,600mm² and 2,000mm²
TELE-FONIKA Kable (TFKable) has conducted the first Factory Acceptance Test (FAT) of a 220kV onshore high-voltage cable for the UK’s Moray East offshore wind farm at its Bydgoszcz plant in Poland. The cable supplier informed via social media that it had successfully FAT-tested 1,600mm² and 2,000mm²
Polish grid operator Polskie Sieci Elektroenergetyczne (PSE) has specified the connection conditions for the Bałtyk I offshore wind farm, which would allow the project to be built to its full capacity of 1,560MW. Bałtyk I is being jointly developed by Polenergia and Equinor, who acquired a 50% stake
Thirteen potential partners have responded to PGE Group’s invitation to develop offshore wind farm projects in the Polish Baltic Sea, Poland’s state-owned power company said. PGE intends to sell up to a 50% stake in two special purpose vehicles that are preparing the offshore projects with a combine
Polenergia and Equinor have secured an additional 240MW of capacity for their 600MW Bałtyk Środkowy II offshore wind project in Poland. The capacity boost is part of the terms that the two companies secured from Polish grid operator Polskie Sieci Elektroenergetyczne (PSE) for establishing a power li
Baltic Trade & Invest (BTI) has announced the deployment of a Seawatch Wind LiDAR buoy within the area of the 350MW FEW Baltic II offshore wind farm project in the Polish Baltic Sea. The Seawatch Wind LiDAR buoy will measure a number of parameters at the site some 50km offshore, on the north side of
