Bowleven Strikes Hydrocarbons Offshore Cameroon

Bowleven, the Africa focused oil and gas exploration group traded on AIM, today announced positive results of the IM-5 well drilling offshore Cameroon.

The IM-5 appraisal/development well, located approximately one kilometre south of the IM-3 well location, has an estimated target depth of 3,475 metres and is drilling in water depths of around 56 metres.

The primary objective of this well is to appraise the reservoir and fluid properties of the Middle Isongo sands. The secondary objective of the well is to investigate the additional potential of the Intra Isongo exploration prospect, a potentially extensive amplitude supported channel system potentially comprising both structural and stratigraphic trapping elements.

The well was also designed to intersect the Upper Isongo sands and confirm that these are present at this location and water-bearing as prognosed.

Following a variety of operational delays of a mechanical nature, the well has now reached a depth of 3,330 metres MD and is currently situated  just beneath the top of the principal Middle Isongo target. The forward plan is to core the Middle Isongo reservoir then drill on to TD before carrying out further logging and flow testing as appropriate.

Bowleven, as operator, provides initial updates for the reservoir sections intersected to date below:

Intra Isongo – potential discovery

Based on logging while drilling (LWD), the well has intersected a gross reservoir interval of approximately 80 metres which corresponds to the seismic event identified pre-drill. A preliminary analysis of provisional net pay is estimated to be between 52 and 56 metres, indicating a net to gross of approximately 70%. Based on preliminary analysis of this data, reservoir quality is believed to be good. Initial indications including  data collected from the GC tracer suggests the presence of liquids rich hydrocarbons, although further evaluation is required. Further logging  (including the acquisition of MDT data) and testing is required to confirm reservoir quality and hydrocarbon content and type.

Middle Isongo

Drilling activity has been temporarily suspended at a depth of 3,330 metres in order to core the Middle Isongo reservoir, which was first  encountered 5 metres above the current well depth. Initial indications also suggest this reservoir is potentially hydrocarbon bearing.Upper Isongo The well has intersected approximately 32 metres of high quality reservoir sands in the Upper Isongo. These sands were, as predicted, water-bearing at this location. Sand thickness and quality were consistent with the pre-drill expectations.

Forward plan

The intention is to acquire core as planned over the Middle Isongo interval and drill to TD. This will most likely be followed by further logging  and testing. It is anticipated that the activities planned prior to testing will take approximately 2 to 3 weeks to complete. Further detailed analysis is now required to assess the implications of the potential discovery in the Intra Isongo.

Kevin Hart, Chief Executive said:

“We are highly encouraged with the results so far on the IM-5 well which to date has confirmed our pre-drill seismic interpretation. The  potentially significant hydrocarbon discovery in the Intra Isongo demonstrates the substantial upside that we believe exists on Etinde. Bowleven is focused on delivering the key requirements that will enable the final investment decision for the Etinde development.  Consequently IM-5 drilling operations will continue with the planned appraisal of the Middle Isongo interval and, subject to the results,the potential testing of both the Intra and Middle Isongo reservoir formations.”

See the company’s presentation here.

[mappress]
January 30, 2013