AWE: Pateke well at 4,083m depth

  • Business & Finance

AWE Limited reports that as at 06:00 hours (6.00am NZST) today, the Pateke-4H development well, offshore New Zealand, including the sidetrack section, was at a measured depth of 4,083m with the 9 5/8 inch casing successfully installed and cemented to a depth of 3,669m.

AWE Pateke well at 4,083m depth

Preparations are under way for the drilling of the next interval using an 8 ½ inch drilling assembly to drill horizontally through the reservoir section to a planned measured depth of 5,361m.

The Kapuni F10 sandstone objective has already been intersected on prognosis with oil shows and real time logging measurements indicating the likely presence of an oil bearing reservoir. The commercial significance of the oil shows will not be clear until the horizontal drilling is completed and the reservoir size and quality is fully assessed.

The Pateke-4H development well is in PMP 38158 and AWE is the Operator. Located in the offshore Taranaki Basin, New Zealand, PMP 38158 contains the Tui, Amokura and Pateke fields and has been producing since 2007.

Pateke-4H is targeting a mapped northern extension of the currently producing Pateke field. The well is being drilled in water depth of approximately 124m with a planned total measured depth of 5,361m, including a 1,272m horizontal section. If successful, the well will be completed for subsequent tie-back to the Tui FPSO (“Umuroa”) for production in 2015.

[mappress]
Press Release, April 08, 2014
Related news

List of related news articles