Photo: Ole Jørgen Bratland/Equinor

Equinor in first-ever drone transport to offshore field

Norwegian oil and gas company Equinor has completed a logistics operation with a drone to an offshore installation in the North Sea offshore Norway.

This embedded content is only visible after accepting cookies.

Equinor said in a statement on Friday that a drone flew a 3D-printed part for the lifeboat system from the Mongstad base to the Troll A platform in the North Sea.

“Development is rapid, and we see a huge potential within drone technology that could transform the way we operate, both under and above the sea surface. Equinor aims to lead the way in utilising new technology on the Norwegian continental shelf”, says Arne Sigve Nylund, Equinor’s executive vice president for Development and Production Norway.

“Drones could reinforce safety, boost production efficiency and contribute to lower CO2 emissions from Norwegian oil and gas. Drones will also play a role as we shape new energy solutions on the Norwegian shelf”, Nylund continues.

Photo by Ole Jørgen Bratland/Equinor

The flight spanning around 80 kilometres to the Troll field took about one hour, at an altitude of approx. 5000 feet.

According to Equinor, the flight was a test, the world’s first of its kind, where an actual freight operation was conducted over a lengthy distance to an operating offshore installation.

The drone was a Camcopter s-100 model, manufactured by Schiebel.

This type of drone has been thoroughly tested and has logged around 70,000 flying hours from other types of operations within the defence and coast guard services. The drone is more than four metres long and weighs in excess of 100 kilograms. It has a cruising speed of more than 150 km/h and it can carry cargo weighing up to 50 kg.

The operator of the drone is the Sandnes-based company Nordic Unmanned.

“Over the longer term, we expect to see new infrastructure for logistics and support operations, which can reinforce what we already have within vessels and helicopters”, says Alena Korbovà Pedersen, who heads the work on developing logistics solutions in Equinor.

“If we are to develop the logistics solutions of the future on the Norwegian shelf, where drones could play an important role, we must cooperate across all of the industry’s players; operating companies, suppliers, the authorities and the trade union and safety interests”, Pedersen continues.

Photo by Ole Jørgen Bratland/Equinor

In addition to conducting logistics operations, airborne drones can also be used for inspections and observations of the technical condition of offshore installations and onshore facilities.

They have extremely advanced camera equipment and can be used in search and rescue operations, for example, to locate people who have fallen into the sea, or for early detection of pollution on the sea. These abilities were also tested during yesterday’s flight.

Drones will also play a role in new energy solutions on the NCS. Drones can inspect wind turbines, deploy equipment to be used by personnel performing maintenance and repairs, and they can deliver critical parts, fast.

Using drones will also enable us to avoid some vessel lifts that can be both more costly and leave a greater environmental footprint.

Equinor explained that the fact that it chose a 3D printed part for its first drone transport offshore was a very natural choice. The part Equinor transported was a diesel nozzle holder – a critical component in the lifeboats on Troll A.

The part is no longer manufactured and is difficult to obtain. Therefore, the part was re-designed and modelled in 3D before an advanced metal 3D printer produced a replica in a sturdy, industrial alloy, Inconel 718. The part was manufactured quickly and was delivered safely and efficiently to Troll A, Norway’s largest gas producer.

It is also worth reminding that Allseas’ giant Pioneering Spirit vessel was the home of the first-ever drone to vessel delivery in the Netherlands in late May.

Related news

List of related news articles