Japan: MES Completes Delivery of Capesize Bulker NEW EXPEDITION

MES Completes Delivery of Capesize Bulker NEW EXPEDITION

Mitsui Engineering & Shipbuilding Co., Ltd. (MES) completed and delivered 174,600 dwt type bulk carrier, MV “NEW EXPEDITION” (MES HULL No. 1825) at its Chiba Works on February 1st, 2013 to Salute Maritime S.A., Panama.

This ship is the 11th ship of the designed Cape-size Bulk Carrier of Dunkerque-max Type*. It enables effective cargo handling, easy maintenance of cargo holds and structural safety by adopting a double-side skin to cargo holds construction.

Principal Particulars:

Length overall 292.00 m

Length (between perpendiculars) 282.00 m

Breadth (molded) 44.98 m

Depth (molded) 24.70 m

Gross Tonnage 92,382

Deadweight 176,387 metric tons

Main Engine MITSUI-MAN B&W Diesel Engine 6S70MC-C x1set

Maximum Continuous Output 18,660 kW x 91rpm

Service Speed 15.5 knots

Complement 27 persons

Classification Society NK

Flag Panama

Date of Delivery February 1st, 2013

Special Features:

  1. In spite of cargo holds bounded by a double-side skin according to SOLAS, the cargo capacity of the ship is equivalent to that of conventional Cape-size bulk carriers with holds bounded by a single-side skin.
  2. The vessel is designed in accordance with IACS Common Structural Rules. As a result, structural safety and operational flexibility are improved.
  3. Suitable arrangement of means of access required by SOLAS enables safe and effective inspection in cargo holds and ballast tanks.
  4. Improvement of safety has been achieved by installation of a forecastle and by application of new requirements concerning reserve buoyancy to the ship.
  5. Main Engine of the ship is MITSUI-MAN B&W Diesel Engine 6S70MC-C, which satisfies IMO Environment Standards for Exhaust Gas and achieves improvement of fuel saving by optimum matching at normal service output. An electronic controlled cylinder oiling system is applied to the main engine achieving operational cost saving.
  6. Ballasting and de-ballasting work can be efficiently made by separation of topside tank and bottom side tank.
  7. Ballast Water Treatment System is installed on board for protection of marine environment.
  8. IMO PSPC(Performance Standard for Protective Coatings) is applied for water ballast tanks to improve the quality and effectiveness of the coatings.

* Cape-size Bulk Carrier of Dunkerque-max type:

A common name for the Cape-size Bulk Carrier accommodated to the restriction of the port of Dunkerque, France.

[mappress]

Press Release, February 1, 2013